＞ Load capacity: 1500kg
＞ Max. lifting height: 190mm / 200mm
＞ Height of tiller in drive postion, min./max.: 700mm / 1250mm
＞ Turning radius: 1424mm / 1454mm
＞ Battery voltage, nominal capacity K20: 24V/65Ah
|Fork height, lowered||mm||85/75|
|Tyre size, front||mm||195*70|
|Tyre size, rear (single)||mm||80*93/74*93|
|Tyre size, rear (double)||mm||80*70/74*70|
|Max. lifting height||mm||200/190|
|Height of tiller in drive position min./max.||mm||700/1250|
|Length to face of forks||mm||504|
|Width overall forks||mm||520/550/685|
|Aisle width for pallets 1000*1200 crossways||mm||1854/1924|
|Aisle width for pallets 800*1200 lengthways||mm||1904/1924|
|Travel speed, laden/unladen||km/h||4.3/4.8|
1). CBD15W-E uses floating balance wheel, which prevents the side swing of the truck when travelling and have great anti-vibration.
2). The balance wheels can be removed easily, easy to maintain.
3). The integral structure of rock arm mechanism which improves the strength effectively, meanwhile, share and adjust the even force from the fork and reduce the obvious deflection in fork height after a long use and when loading.
4). The drive wheel of CBD15W-E is using horizontal type structure which makes the layout position of the motor higher off the ground to prevent the water & dust and greasy dirt gluing on the motor effectively and improve working condition of the motor.
5). CBD15W-E is equipped with a height limit switch. Cut off the lifting circuit when lifting height approaches the highest point to disconnect the power of the hydraulic power unit to prevent the noise from the spillover of the hydraulic station and save the energy caused by spillover.